Citroën Berlingo 1.6 HDiF 8V 115hp Remap
Expected gains of +25 BHP and +30 Nm torque
Get Your Free Quote ↓BHP+25 hp (22%)
Standard
115 hp
Tuned
140 hp
Torque+30 Nm (11%)
Standard
270 Nm
Tuned
300 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumCitroën Berlingo 1.6 HDiF 8V 115hp ECU Remapping
Considering an ECU remap for your Citroën Berlingo 1.6 HDiF 8V 115hp? A Stage 1 remap can take this 2012 - 2015 diesel engine from 115 BHP to 140 BHP and from 270 Nm to 300 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën Berlingo can achieve.
How this engine compares
- 15thof 28 Citroën Berlingo engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën Berlingo 1.6 HDiF 8V 115hp is a 1.6L turbocharged diesel engine producing 115 BHP and 270 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 300 Nm — a gain of around 25 BHP (22%) and 30 Nm (11%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Berlingo 2012 - 2015 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 HDi 16V 75hp | 75 → 115 |