BHP+10 hp (10%)
Standard
98 hp
Tuned
108 hp
Torque+13 Nm (9%)
Standard
152 Nm
Tuned
165 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowCitroën Berlingo 1.6 VTi 98hp ECU Remapping
Considering an ECU remap for your Citroën Berlingo 1.6 VTi 98hp? A Stage 1 remap can take this 2008 - 2012 petrol engine from 98 BHP to 108 BHP and from 152 Nm to 165 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën Berlingo can achieve.
How this engine compares
- 24thof 28 Citroën Berlingo engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 2%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën Berlingo 1.6 VTi 98hp is a 1.6L naturally aspirated petrol engine producing 98 BHP and 152 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 108 BHP and 165 Nm — a gain of around 10 BHP (10%) and 13 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Berlingo 2008 - 2012 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|