Chrysler Pacifica 4.0 V6 253hp Remap
Expected gains of +22 BHP and +20 Nm torque
Get Your Free Quote ↓BHP+22 hp (9%)
Standard
253 hp
Tuned
275 hp
Torque+20 Nm (6%)
Standard
355 Nm
Tuned
375 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowChrysler Pacifica 4.0 V6 253hp ECU Remapping
Considering an ECU remap for your Chrysler Pacifica 4.0 V6 253hp? A Stage 1 remap can take this 2004 - 2008 petrol engine from 253 BHP to 275 BHP and from 355 Nm to 375 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chrysler Pacifica can achieve.
How this engine compares
- 1stof 2 Chrysler Pacifica engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chrysler Pacifica 4.0 V6 253hp is a 4.0L naturally aspirated petrol engine producing 253 BHP and 355 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 275 BHP and 375 Nm — a gain of around 22 BHP (9%) and 20 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Technical Specifications
- Fuel Type
- Petrol
- Aspiration
- Naturally Aspirated
- Displacement