Chrysler Crossfire 3.2 V6 218hp Remap
Expected gains of +15 BHP and +20 Nm torque
Get Your Free Quote ↓BHP+15 hp (7%)
Standard
218 hp
Tuned
233 hp
Torque+20 Nm (6%)
Standard
310 Nm
Tuned
330 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowChrysler Crossfire 3.2 V6 218hp ECU Remapping
Considering an ECU remap for your Chrysler Crossfire 3.2 V6 218hp? A Stage 1 remap can take this 2003 - 2008 petrol engine from 218 BHP to 233 BHP and from 310 Nm to 330 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chrysler Crossfire can achieve.
How this engine compares
- 2ndof 2 Chrysler Crossfire engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chrysler Crossfire 3.2 V6 218hp is a 3.2L naturally aspirated petrol engine producing 218 BHP and 310 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 233 BHP and 330 Nm — a gain of around 15 BHP (7%) and 20 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Crossfire 2003 - 2008 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|