BHP+21 hp (9%)
Standard
234 hp
Tuned
255 hp
Torque+22 Nm (6%)
Standard
393 Nm
Tuned
415 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowChrysler Aspen 4.7 V8 234hp ECU Remapping
Considering an ECU remap for your Chrysler Aspen 4.7 V8 234hp? A Stage 1 remap can take this 2004 - 2009 petrol engine from 234 BHP to 255 BHP and from 393 Nm to 415 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chrysler Aspen can achieve.
How this engine compares
- 2ndof 3 Chrysler Aspen engines by power gain
- 24%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chrysler Aspen 4.7 V8 234hp is a 4.7L naturally aspirated petrol engine producing 234 BHP and 393 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 255 BHP and 415 Nm — a gain of around 21 BHP (9%) and 22 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other Aspen 2004 - 2009 Engines
| Engine |
|---|