BHP+20 hp (8%)
Standard
250 hp
Tuned
270 hp
Torque+21 Nm (6%)
Standard
339 Nm
Tuned
360 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowChrysler 300C 3.5 V6 250hp ECU Remapping
Considering an ECU remap for your Chrysler 300C 3.5 V6 250hp? A Stage 1 remap can take this 2004 - 2011 petrol engine from 250 BHP to 270 BHP and from 339 Nm to 360 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chrysler 300C can achieve.
How this engine compares
- 4thof 9 Chrysler 300C engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chrysler 300C 3.5 V6 250hp is a 3.5L naturally aspirated petrol engine producing 250 BHP and 339 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 270 BHP and 360 Nm — a gain of around 20 BHP (8%) and 21 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 300C 2004 - 2011 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|