Chevrolet Uplander 3.9 V6 243hp Remap
Expected gains of +22 BHP and +35 Nm torque
Get Your Free Quote ↓BHP+22 hp (9%)
Standard
243 hp
Tuned
265 hp
Torque+35 Nm (11%)
Standard
325 Nm
Tuned
360 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowChevrolet Uplander 3.9 V6 243hp ECU Remapping
Considering an ECU remap for your Chevrolet Uplander 3.9 V6 243hp? A Stage 1 remap can take this 2007 - 2009 petrol engine from 243 BHP to 265 BHP and from 325 Nm to 360 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Uplander can achieve.
How this engine compares
- 2ndof 2 Chevrolet Uplander engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 20%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Uplander 3.9 V6 243hp is a 3.9L naturally aspirated petrol engine producing 243 BHP and 325 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 265 BHP and 360 Nm — a gain of around 22 BHP (9%) and 35 Nm (11%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Uplander 2007 - 2009 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|