Chevrolet Traverse 3.6 V6 288hp Remap
Expected gains of +22 BHP and +24 Nm torque
Get Your Free Quote ↓BHP+22 hp (8%)
Standard
288 hp
Tuned
310 hp
Torque+24 Nm (7%)
Standard
366 Nm
Tuned
390 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowChevrolet Traverse 3.6 V6 288hp ECU Remapping
Considering an ECU remap for your Chevrolet Traverse 3.6 V6 288hp? A Stage 1 remap can take this 2009 - 2012 petrol engine from 288 BHP to 310 BHP and from 366 Nm to 390 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Traverse can achieve.
How this engine compares
- 2ndof 5 Chevrolet Traverse engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 13%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Traverse 3.6 V6 288hp is a 3.6L naturally aspirated petrol engine producing 288 BHP and 366 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 310 BHP and 390 Nm — a gain of around 22 BHP (8%) and 24 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Traverse 2009 - 2012 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|