BHP+20 hp (7%)
Standard
285 hp
Tuned
305 hp
Torque+26 Nm (6%)
Standard
454 Nm
Tuned
480 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowChevrolet Tahoe 4.8 V8 285hp ECU Remapping
Considering an ECU remap for your Chevrolet Tahoe 4.8 V8 285hp? A Stage 1 remap can take this 2000 - 2006 petrol engine from 285 BHP to 305 BHP and from 454 Nm to 480 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Tahoe can achieve.
How this engine compares
- 1stof 6 Chevrolet Tahoe engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 16%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Tahoe 4.8 V8 285hp is a 4.8L naturally aspirated petrol engine producing 285 BHP and 454 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 305 BHP and 480 Nm — a gain of around 20 BHP (7%) and 26 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other Tahoe 2000 - 2006 Engines
| Engine |
|---|