Chevrolet Monte Carlo 3.9 V6 242hp Remap
Expected gains of +18 BHP and +22 Nm torque
Get Your Free Quote ↓BHP+18 hp (7%)
Standard
242 hp
Tuned
260 hp
Torque+22 Nm (7%)
Standard
328 Nm
Tuned
350 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowChevrolet Monte Carlo 3.9 V6 242hp ECU Remapping
Considering an ECU remap for your Chevrolet Monte Carlo 3.9 V6 242hp? A Stage 1 remap can take this 2006 - 2007 petrol engine from 242 BHP to 260 BHP and from 328 Nm to 350 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Monte Carlo can achieve.
How this engine compares
- 6thof 6 Chevrolet Monte Carlo engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Monte Carlo 3.9 V6 242hp is a 3.9L naturally aspirated petrol engine producing 242 BHP and 328 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 260 BHP and 350 Nm — a gain of around 18 BHP (7%) and 22 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Monte Carlo 2006 - 2007 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|