Chevrolet Monte Carlo 3.1 V6 160hp Remap
Expected gains of +20 BHP and +24 Nm torque
Get Your Free Quote ↓BHP+20 hp (13%)
Standard
160 hp
Tuned
180 hp
Torque+24 Nm (10%)
Standard
251 Nm
Tuned
275 Nm
Suitability
Moderate (4.5/10)Gains Profile
Power-focusedHeadroom
MediumChevrolet Monte Carlo 3.1 V6 160hp ECU Remapping
Considering an ECU remap for your Chevrolet Monte Carlo 3.1 V6 160hp? A Stage 1 remap can take this 1997 - 2005 petrol engine from 160 BHP to 180 BHP and from 251 Nm to 275 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Monte Carlo can achieve.
How this engine compares
- 2ndof 6 Chevrolet Monte Carlo engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 13%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Monte Carlo 3.1 V6 160hp is a 3.1L naturally aspirated petrol engine producing 160 BHP and 251 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 275 Nm — a gain of around 20 BHP (12%) and 24 Nm (10%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Monte Carlo 1997 - 2005 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|