BHP+19 hp (9%)
Standard
211 hp
Tuned
230 hp
Torque+30 Nm (10%)
Standard
290 Nm
Tuned
320 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowChevrolet Impala 3.5 V6 211hp ECU Remapping
Considering an ECU remap for your Chevrolet Impala 3.5 V6 211hp? A Stage 1 remap can take this 2006 - 2014 petrol engine from 211 BHP to 230 BHP and from 290 Nm to 320 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Impala can achieve.
How this engine compares
- 7thof 7 Chevrolet Impala engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Impala 3.5 V6 211hp is a 3.5L naturally aspirated petrol engine producing 211 BHP and 290 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 320 Nm — a gain of around 19 BHP (9%) and 30 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Impala 2006 - 2014 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|