Chevrolet Colorado 2.8i - 175hp Remap
Expected gains of +15 BHP and +24 Nm torque
Get Your Free Quote ↓BHP+15 hp (9%)
Standard
175 hp
Tuned
190 hp
Torque+24 Nm (10%)
Standard
251 Nm
Tuned
275 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowChevrolet Colorado 2.8i - 175hp ECU Remapping
Considering an ECU remap for your Chevrolet Colorado 2.8i - 175hp? A Stage 1 remap can take this 2003 - 2012 petrol engine from 175 BHP to 190 BHP and from 251 Nm to 275 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Colorado can achieve.
How this engine compares
- 7thof 8 Chevrolet Colorado engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 13%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Colorado 2.8i - 175hp is a 2.8L naturally aspirated petrol engine producing 175 BHP and 251 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 275 Nm — a gain of around 15 BHP (9%) and 24 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Colorado 2003 - 2012 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|