BHP+15 hp (10%)
Standard
155 hp
Tuned
170 hp
Torque+22 Nm (11%)
Standard
203 Nm
Tuned
225 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumChevrolet Cobalt 2.2 155hp ECU Remapping
Considering an ECU remap for your Chevrolet Cobalt 2.2 155hp? A Stage 1 remap can take this 2008 - 2010 petrol engine from 155 BHP to 170 BHP and from 203 Nm to 225 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Cobalt can achieve.
How this engine compares
- 5thof 6 Chevrolet Cobalt engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Cobalt 2.2 155hp is a 2.2L naturally aspirated petrol engine producing 155 BHP and 203 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 170 BHP and 225 Nm — a gain of around 15 BHP (10%) and 22 Nm (11%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Cobalt 2008 - 2010 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|