BHP+15 hp (10%)
Standard
145 hp
Tuned
160 hp
Torque+20 Nm (10%)
Standard
210 Nm
Tuned
230 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowChevrolet Cobalt 2.0i 145hp ECU Remapping
Considering an ECU remap for your Chevrolet Cobalt 2.0i 145hp? A Stage 1 remap can take this 2005 - 2007 petrol engine from 145 BHP to 160 BHP and from 210 Nm to 230 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Cobalt can achieve.
How this engine compares
- 5thof 6 Chevrolet Cobalt engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Cobalt 2.0i 145hp is a 2.2L naturally aspirated petrol engine producing 145 BHP and 210 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 230 Nm — a gain of around 15 BHP (10%) and 20 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Cobalt 2005 - 2007 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|