Chevrolet Captiva 3.2 V6 230hp Remap
Expected gains of +15 BHP and +23 Nm torque
Get Your Free Quote ↓BHP+15 hp (7%)
Standard
230 hp
Tuned
245 hp
Torque+23 Nm (8%)
Standard
297 Nm
Tuned
320 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowChevrolet Captiva 3.2 V6 230hp ECU Remapping
Considering an ECU remap for your Chevrolet Captiva 3.2 V6 230hp? A Stage 1 remap can take this 2006 - 2011 petrol engine from 230 BHP to 245 BHP and from 297 Nm to 320 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Captiva can achieve.
How this engine compares
- 5thof 8 Chevrolet Captiva engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 13%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Captiva 3.2 V6 230hp is a 3.2L naturally aspirated petrol engine producing 230 BHP and 297 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 245 BHP and 320 Nm — a gain of around 15 BHP (7%) and 23 Nm (8%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Captiva 2006 - 2011 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|