BHP+20 hp (6%)
Standard
335 hp
Tuned
355 hp
Torque+20 Nm (5%)
Standard
385 Nm
Tuned
405 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowChevrolet Camaro 3.6 V6 335hp ECU Remapping
Considering an ECU remap for your Chevrolet Camaro 3.6 V6 335hp? A Stage 1 remap can take this 2016 -> petrol engine from 335 BHP to 355 BHP and from 385 Nm to 405 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Camaro can achieve.
How this engine compares
- 3rdof 10 Chevrolet Camaro engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Camaro 3.6 V6 335hp is a 3.6L naturally aspirated petrol engine producing 335 BHP and 385 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 355 BHP and 405 Nm — a gain of around 20 BHP (6%) and 20 Nm (5%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other Camaro 2016 -> Engines
| Engine |
|---|