BHP+18 hp (4%)
Standard
432 hp
Tuned
450 hp
Torque+31 Nm (5%)
Standard
569 Nm
Tuned
600 Nm
Suitability
Limited (3/10)Gains Profile
Limited headroomHeadroom
LowChevrolet Camaro 6.2 V8 432hp ECU Remapping
Considering an ECU remap for your Chevrolet Camaro 6.2 V8 432hp? A Stage 1 remap can take this 2010 - 2015 petrol engine from 432 BHP to 450 BHP and from 569 Nm to 600 Nm of torque (naturally aspirated). This engine scores 3/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Camaro can achieve.
How this engine compares
- 10thof 10 Chevrolet Camaro engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 19%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chevrolet Camaro 6.2 V8 432hp is a 6.2L naturally aspirated petrol engine producing 432 BHP and 569 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 450 BHP and 600 Nm — a gain of around 18 BHP (4%) and 31 Nm (5%).
This engine has low remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other Camaro 2010 - 2015 Engines
| Engine |
|---|