BHP+20 hp (6%)
Standard
310 hp
Tuned
330 hp
Torque+23 Nm (6%)
Standard
367 Nm
Tuned
390 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowCadillac XT5 3.6 V6 310hp ECU Remapping
Considering an ECU remap for your Cadillac XT5 3.6 V6 310hp? A Stage 1 remap can take this 2017 - 2019 petrol engine from 310 BHP to 330 BHP and from 367 Nm to 390 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Cadillac XT5 can achieve.
How this engine compares
- 2ndof 2 Cadillac XT5 engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 13%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Cadillac XT5 3.6 V6 310hp is a 3.6L naturally aspirated petrol engine producing 310 BHP and 367 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 330 BHP and 390 Nm — a gain of around 20 BHP (6%) and 23 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other XT5 2017 - 2019 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|