BHP+31 hp (7%)
Standard
469 hp
Tuned
500 hp
Torque+85 Nm (14%)
Standard
595 Nm
Tuned
680 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumCadillac STS 4.4 V8 469hp ECU Remapping
Considering an ECU remap for your Cadillac STS 4.4 V8 469hp? A Stage 1 remap can take this 2006 - 2010 petrol engine from 469 BHP to 500 BHP and from 595 Nm to 680 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Cadillac STS can achieve.
How this engine compares
- 1stof 3 Cadillac STS engines by power gain
- 50%of the 9,842 engines we hold gain data for see a smaller power increase
- 73%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Cadillac STS 4.4 V8 469hp is a 4.4L naturally aspirated petrol engine producing 469 BHP and 595 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 500 BHP and 680 Nm — a gain of around 31 BHP (7%) and 85 Nm (14%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.