BHP+20 hp (8%)
Standard
265 hp
Tuned
285 hp
Torque+28 Nm (9%)
Standard
302 Nm
Tuned
330 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowCadillac SRX 3.0 V6 265hp ECU Remapping
Considering an ECU remap for your Cadillac SRX 3.0 V6 265hp? A Stage 1 remap can take this 2010 - 2016 petrol engine from 265 BHP to 285 BHP and from 302 Nm to 330 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Cadillac SRX can achieve.
How this engine compares
- 1stof 4 Cadillac SRX engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 16%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Cadillac SRX 3.0 V6 265hp is a 3.0L naturally aspirated petrol engine producing 265 BHP and 302 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 285 BHP and 330 Nm — a gain of around 20 BHP (8%) and 28 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other SRX 2010 - 2016 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|