BHP+22 hp (6%)
Standard
340 hp
Tuned
362 hp
Torque+16 Nm (4%)
Standard
386 Nm
Tuned
402 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowCadillac CTS 3.6 V6 340hp ECU Remapping
Considering an ECU remap for your Cadillac CTS 3.6 V6 340hp? A Stage 1 remap can take this 2014 -> petrol engine from 340 BHP to 362 BHP and from 386 Nm to 402 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Cadillac CTS can achieve.
How this engine compares
- 6thof 14 Cadillac CTS engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 6%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Cadillac CTS 3.6 V6 340hp is a 3.6L naturally aspirated petrol engine producing 340 BHP and 386 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 362 BHP and 402 Nm — a gain of around 22 BHP (6%) and 16 Nm (4%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other CTS 2014 -> Engines
| Engine |
|---|