BHP+18 hp (10%)
Standard
180 hp
Tuned
198 hp
Torque+17 Nm (7%)
Standard
232 Nm
Tuned
249 Nm
Suitability
Moderate (4/10)Gains Profile
Power-focusedHeadroom
LowBuick Verano 2.4i 180hp ECU Remapping
Considering an ECU remap for your Buick Verano 2.4i 180hp? A Stage 1 remap can take this 2013 - 2017 petrol engine from 180 BHP to 198 BHP and from 232 Nm to 249 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Buick Verano can achieve.
How this engine compares
- 3rdof 3 Buick Verano engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 6%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Buick Verano 2.4i 180hp is a 2.4L naturally aspirated petrol engine producing 180 BHP and 232 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 198 BHP and 249 Nm — a gain of around 18 BHP (10%) and 17 Nm (7%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Verano 2013 - 2017 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|