BHP+17 hp (10%)
Standard
163 hp
Tuned
180 hp
Torque+50 Nm (20%)
Standard
250 Nm
Tuned
300 Nm
Suitability
Good (7/10)Gains Profile
Torque-focusedHeadroom
MediumBuick Regal 1.5 Turbo 163hp ECU Remapping
Considering an ECU remap for your Buick Regal 1.5 Turbo 163hp? A Stage 1 remap can take this 2010 -> petrol engine from 163 BHP to 180 BHP and from 250 Nm to 300 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Buick Regal can achieve.
How this engine compares
- 7thof 7 Buick Regal engines by power gain
- 12%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Buick Regal 1.5 Turbo 163hp is a 1.5L turbocharged petrol engine producing 163 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 300 Nm — a gain of around 17 BHP (10%) and 50 Nm (20%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other Regal 2010 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|