BHP+30 hp (27%)
Standard
110 hp
Tuned
140 hp
Torque+60 Nm (20%)
Standard
300 Nm
Tuned
360 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighBuick Encore 1.6 CDTi 110hp ECU Remapping
Considering an ECU remap for your Buick Encore 1.6 CDTi 110hp? A Stage 1 remap can take this 2016 - 2018 diesel engine from 110 BHP to 140 BHP and from 300 Nm to 360 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Buick Encore can achieve.
How this engine compares
- 1stof 5 Buick Encore engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Buick Encore 1.6 CDTi 110hp is a 1.6L turbocharged diesel engine producing 110 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 360 Nm — a gain of around 30 BHP (27%) and 60 Nm (20%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Encore 2016 - 2018 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 CDTi 136hp | 136 → 160 | +24 |