BHP+18 hp (9%)
Standard
192 hp
Tuned
210 hp
Torque+20 Nm (8%)
Standard
245 Nm
Tuned
265 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowBMW Z4 2.5i 192hp ECU Remapping
Considering an ECU remap for your BMW Z4 2.5i 192hp? A Stage 1 remap can take this E85 - 2003 - 2008 petrol engine from 192 BHP to 210 BHP and from 245 Nm to 265 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your BMW Z4 can achieve.
How this engine compares
- 19thof 26 BMW Z4 engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The BMW Z4 2.5i 192hp is a 2.5L naturally aspirated petrol engine producing 192 BHP and 245 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 265 Nm — a gain of around 18 BHP (9%) and 20 Nm (8%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is many variants use zf 5/6-speed automatics (where fitted); manuals also exist..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Z4 E85 - 2003 - 2008 Engines
| Engine | BHP | Gain |
|---|