BHP+15 hp (10%)
Standard
150 hp
Tuned
165 hp
Torque+20 Nm (10%)
Standard
200 Nm
Tuned
220 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumBMW X3 2.0i 150hp ECU Remapping
Considering an ECU remap for your BMW X3 2.0i 150hp? A Stage 1 remap can take this E83 - 2004 - 2010 petrol engine from 150 BHP to 165 BHP and from 200 Nm to 220 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your BMW X3 can achieve.
How this engine compares
- 40thof 41 BMW X3 engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The BMW X3 2.0i 150hp is a 2.0L naturally aspirated petrol engine producing 150 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 165 BHP and 220 Nm — a gain of around 15 BHP (10%) and 20 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is many variants use zf 5/6-speed automatics (where fitted); manuals also exist..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other X3 E83 - 2004 - 2010 Engines
| Engine | BHP | Gain |
|---|