BHP+14 hp (5%)
Standard
258 hp
Tuned
272 hp
Torque+20 Nm (7%)
Standard
300 Nm
Tuned
320 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowBMW 7 Series 730i 258hp ECU Remapping
Considering an ECU remap for your BMW 7 Series 730i 258hp? A Stage 1 remap can take this E65 - 2002 - 2008 petrol engine from 258 BHP to 272 BHP and from 300 Nm to 320 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your BMW 7 Series can achieve.
How this engine compares
- 47thof 48 BMW 7 Series engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The BMW 7 serie 730i 258hp is a 3.0L naturally aspirated petrol engine producing 258 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 272 BHP and 320 Nm — a gain of around 14 BHP (5%) and 20 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is many variants use zf 5/6-speed automatics (where fitted); manuals also exist..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 7 Series E65 - 2002 - 2008 Engines
| Engine | BHP | Gain |
|---|