BHP+32 hp (22%)
Standard
143 hp
Tuned
175 hp
Torque+70 Nm (27%)
Standard
260 Nm
Tuned
330 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighBMW 5 Series 525 TDS 143hp ECU Remapping
Considering an ECU remap for your BMW 5 Series 525 TDS 143hp? A Stage 1 remap can take this E34 diesel engine from 143 BHP to 175 BHP and from 260 Nm to 330 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your BMW 5 Series can achieve.
How this engine compares
- 69thof 100 BMW 5 Series engines by power gain
- 51%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The BMW 5 serie 525 TDS 143hp is a 2.5L turbocharged diesel engine producing 143 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 175 BHP and 330 Nm — a gain of around 32 BHP (22%) and 70 Nm (27%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch EDC17 (likely).
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other 5 Series E34 Engines
| Engine |
|---|