BHP+20 hp (7%)
Standard
272 hp
Tuned
292 hp
Torque+25 Nm (8%)
Standard
320 Nm
Tuned
345 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowBMW 3 Series 330i 272hp ECU Remapping
Considering an ECU remap for your BMW 3 Series 330i 272hp? A Stage 1 remap can take this E90/E91 - 2010 - 2011 petrol engine from 272 BHP to 292 BHP and from 320 Nm to 345 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your BMW 3 Series can achieve.
How this engine compares
- 116thof 141 BMW 3 Series engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The BMW 3 serie 330i 272hp is a 3.0L naturally aspirated petrol engine producing 272 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 292 BHP and 345 Nm — a gain of around 20 BHP (7%) and 25 Nm (8%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is many variants use zf 5/6-speed automatics (where fitted); manuals also exist..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 3 Series E90/E91 - 2010 - 2011 Engines
| Engine | BHP | Gain |
|---|