BHP+8 hp (4%)
Standard
192 hp
Tuned
200 hp
Torque+27 Nm (11%)
Standard
245 Nm
Tuned
272 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowBMW 3 Series 325i 192hp ECU Remapping
Considering an ECU remap for your BMW 3 Series 325i 192hp? A Stage 1 remap can take this E46 - 1998 - 2005 petrol engine from 192 BHP to 200 BHP and from 245 Nm to 272 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your BMW 3 Series can achieve.
How this engine compares
- 141stof 141 BMW 3 Series engines by power gain
- 1%of the 9,842 engines we hold gain data for see a smaller power increase
- 16%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The BMW 3 serie 325i 192hp is a 2.5L naturally aspirated petrol engine producing 192 BHP and 245 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 272 Nm — a gain of around 8 BHP (4%) and 27 Nm (11%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 3 Series E46 - 1998 - 2005 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|