Audi SQ5 3.0 TDI Bi-Turbo 326hp Remap
Expected gains of +54 BHP and +150 Nm torque
Get Your Free Quote ↓BHP+54 hp (17%)
Standard
326 hp
Tuned
380 hp
Torque+150 Nm (23%)
Standard
650 Nm
Tuned
800 Nm
Suitability
Good (7/10)Gains Profile
Torque-focusedHeadroom
MediumAudi SQ5 3.0 TDI Bi-Turbo 326hp ECU Remapping
Considering an ECU remap for your Audi SQ5 3.0 TDI Bi-Turbo 326hp? A Stage 1 remap can take this 8R - MK1 - 2012 - 2017 diesel engine from 326 BHP to 380 BHP and from 650 Nm to 800 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi SQ5 can achieve.
How this engine compares
- 3rdof 7 Audi SQ5 engines by power gain
- 81%of the 9,842 engines we hold gain data for see a smaller power increase
- 92%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi SQ5 3.0 TDI Bi-Turbo 326hp is a 3.0L turbocharged diesel engine producing 326 BHP and 650 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 380 BHP and 800 Nm — a gain of around 54 BHP (17%) and 150 Nm (23%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is a Bosch EDC17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine. some dsg/dual-clutch gearboxes have torque management; calibration may be torque-limited. at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.