BHP+50 hp (8%)
Standard
630 hp
Tuned
680 hp
Torque+100 Nm (12%)
Standard
850 Nm
Tuned
950 Nm
Suitability
Moderate (5.5/10)Gains Profile
Torque-focusedHeadroom
LowAudi RS6 4.0 TFSI GT 630hp ECU Remapping
Considering an ECU remap for your Audi RS6 4.0 TFSI GT 630hp? A Stage 1 remap can take this C8 - 2020 -> petrol engine from 630 BHP to 680 BHP and from 850 Nm to 950 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi RS6 can achieve.
How this engine compares
- 5thof 8 Audi RS6 engines by power gain
- 76%of the 9,842 engines we hold gain data for see a smaller power increase
- 79%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi RS6 4.0 TFSI GT 630hp is a 4.0L turbocharged petrol engine producing 630 BHP and 850 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 680 BHP and 950 Nm — a gain of around 50 BHP (8%) and 100 Nm (12%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine. some dsg/dual-clutch gearboxes have torque management; calibration may be torque-limited. at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!