BHP+90 hp (16%)
Standard
560 hp
Tuned
650 hp
Torque+150 Nm (21%)
Standard
700 Nm
Tuned
850 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumAudi RS6 4.0 TFSI - 560hp ECU Remapping
Considering an ECU remap for your Audi RS6 4.0 TFSI - 560hp? A Stage 1 remap can take this C7 - 2012 - 2019 petrol engine from 560 BHP to 650 BHP and from 700 Nm to 850 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi RS6 can achieve.
How this engine compares
- 2ndof 8 Audi RS6 engines by power gain
- 97%of the 9,842 engines we hold gain data for see a smaller power increase
- 92%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi RS6 4.0 TFSI - 560hp is a 4.0L turbocharged petrol engine producing 560 BHP and 700 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 650 BHP and 850 Nm — a gain of around 90 BHP (16%) and 150 Nm (21%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine. some dsg/dual-clutch gearboxes have torque management; calibration may be torque-limited. at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!