BHP+22 hp (8%)
Standard
280 hp
Tuned
302 hp
Torque+24 Nm (7%)
Standard
360 Nm
Tuned
384 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowAudi Q7 3.6 FSI 280hp ECU Remapping
Considering an ECU remap for your Audi Q7 3.6 FSI 280hp? A Stage 1 remap can take this 4L MK2 - 2010 - 2014 petrol engine from 280 BHP to 302 BHP and from 360 Nm to 384 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi Q7 can achieve.
How this engine compares
- 27thof 30 Audi Q7 engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 13%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi Q7 3.6 FSI 280hp is a 3.6L naturally aspirated petrol engine producing 280 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 302 BHP and 384 Nm — a gain of around 22 BHP (8%) and 24 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Q7 4L MK2 - 2010 - 2014 Engines
| Engine | BHP |
|---|