BHP+55 hp (22%)
Standard
245 hp
Tuned
300 hp
Torque+70 Nm (15%)
Standard
480 Nm
Tuned
550 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumAudi Q5 2.0 TFSI Hybrid 245hp ECU Remapping
Considering an ECU remap for your Audi Q5 2.0 TFSI Hybrid 245hp? A Stage 1 remap can take this 8R - 2012 - 2016 petrol engine from 245 BHP to 300 BHP and from 480 Nm to 550 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi Q5 can achieve.
How this engine compares
- 11thof 35 Audi Q5 engines by power gain
- 82%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi Q5 2.0 TFSI Hybrid 245hp is a 2.0L turbocharged petrol engine producing 245 BHP and 480 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 550 Nm — a gain of around 55 BHP (22%) and 70 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine. some dsg/dual-clutch gearboxes have torque management; calibration may be torque-limited. at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.