BHP+20 hp (9%)
Standard
220 hp
Tuned
240 hp
Torque+25 Nm (8%)
Standard
300 Nm
Tuned
325 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowAudi A6 3.0 V6 220hp ECU Remapping
Considering an ECU remap for your Audi A6 3.0 V6 220hp? A Stage 1 remap can take this C5 - 1997 - 2004 petrol engine from 220 BHP to 240 BHP and from 300 Nm to 325 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi A6 can achieve.
How this engine compares
- 71stof 79 Audi A6 engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi A6 3.0 V6 220hp is a 3.0L naturally aspirated petrol engine producing 220 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 240 BHP and 325 Nm — a gain of around 20 BHP (9%) and 25 Nm (8%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other A6 C5 - 1997 - 2004 Engines
| Engine | BHP | Gain |
|---|