BHP+41 hp (20%)
Standard
204 hp
Tuned
245 hp
Torque+110 Nm (34%)
Standard
320 Nm
Tuned
430 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighAudi A4 40 TFSI (2.0T) 204hp ECU Remapping
Considering an ECU remap for your Audi A4 40 TFSI (2.0T) 204hp? A Stage 1 remap can take this B9 - 2019 -> petrol mhev engine from 204 BHP to 245 BHP and from 320 Nm to 430 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi A4 can achieve.
How this engine compares
- 57thof 101 Audi A4 engines by power gain
- 69%of the 9,842 engines we hold gain data for see a smaller power increase
- 85%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi A4 40 TFSI (2.0T) 204hp is a 2.0L turbocharged petrol mhev engine producing 204 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 245 BHP and 430 Nm — a gain of around 41 BHP (20%) and 110 Nm (34%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine. some dsg/dual-clutch gearboxes have torque management; calibration may be torque-limited..
Considerations: High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.