BHP+30 hp (27%)
Standard
110 hp
Tuned
140 hp
Torque+40 Nm (20%)
Standard
200 Nm
Tuned
240 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighAudi A3 30 TFSI (1.0T) 110hp ECU Remapping
Considering an ECU remap for your Audi A3 30 TFSI (1.0T) 110hp? A Stage 1 remap can take this 8Y - 2020 - 2024 petrol mhev engine from 110 BHP to 140 BHP and from 200 Nm to 240 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi A3 can achieve.
How this engine compares
- 50thof 71 Audi A3 engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi A3 30 TFSI (1.0T) 110hp is a 1.0L turbocharged petrol mhev engine producing 110 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 240 Nm — a gain of around 30 BHP (27%) and 40 Nm (20%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other A3 8Y - 2020 - 2024 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 30 TDI (2.0D) 116hp |