BHP+10 hp (9%)
Standard
115 hp
Tuned
125 hp
Torque+15 Nm (10%)
Standard
155 Nm
Tuned
170 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowAudi A3 1.6 FSI 115hp ECU Remapping
Considering an ECU remap for your Audi A3 1.6 FSI 115hp? A Stage 1 remap can take this 8P - 2003 - 2008 petrol engine from 115 BHP to 125 BHP and from 155 Nm to 170 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi A3 can achieve.
How this engine compares
- 68thof 71 Audi A3 engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi A3 1.6 FSI 115hp is a 1.6L naturally aspirated petrol engine producing 115 BHP and 155 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 125 BHP and 170 Nm — a gain of around 10 BHP (9%) and 15 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED9/MED17 (varies), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other A3 8P - 2003 - 2008 Engines
| Engine | BHP |
|---|