Alpina D5 S 3.0 Bi-Turbo 388hp Remap
Expected gains of +62 BHP and +50 Nm torque
Get Your Free Quote ↓BHP+62 hp (16%)
Standard
388 hp
Tuned
450 hp
Torque+50 Nm (6%)
Standard
800 Nm
Tuned
850 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumAlpina D5 S 3.0 Bi-Turbo 388hp ECU Remapping
Considering an ECU remap for your Alpina D5 S 3.0 Bi-Turbo 388hp? A Stage 1 remap can take this G30/31- 2017 - 2019 diesel engine from 388 BHP to 450 BHP and from 800 Nm to 850 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alpina D5 can achieve.
How this engine compares
- 1stof 2 Alpina D5 engines by power gain
- 88%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Alpina D5 S 3.0 Bi-Turbo 388hp is a 3.0L turbocharged diesel engine producing 388 BHP and 800 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 450 BHP and 850 Nm — a gain of around 62 BHP (16%) and 50 Nm (6%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Technical Specifications
- Fuel Type
- Diesel
- Aspiration
- Turbocharged
- Displacement
- 3L