BHP+35 hp (6%)
Standard
540 hp
Tuned
575 hp
Torque+70 Nm (10%)
Standard
730 Nm
Tuned
800 Nm
Suitability
Moderate (5.5/10)Gains Profile
Torque-focusedHeadroom
LowAlpina B6 B6 Bi-Turbo 540hp ECU Remapping
Considering an ECU remap for your Alpina B6 B6 Bi-Turbo 540hp? A Stage 1 remap can take this All petrol engine from 540 BHP to 575 BHP and from 730 Nm to 800 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alpina B6 can achieve.
How this engine compares
- 3rdof 3 Alpina B6 engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Alpina B6 B6 Bi-Turbo 540hp is a 4.4L turbocharged petrol engine producing 540 BHP and 730 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 575 BHP and 800 Nm — a gain of around 35 BHP (6%) and 70 Nm (10%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.
Other B6 All Engines
| Engine |
|---|