BHP+30 hp (11%)
Standard
280 hp
Tuned
310 hp
Torque+60 Nm (15%)
Standard
400 Nm
Tuned
460 Nm
Suitability
Good (6/10)Gains Profile
Torque-focusedHeadroom
MediumAlfa Romeo Stelvio 2.0T 280hp ECU Remapping
Considering an ECU remap for your Alfa Romeo Stelvio 2.0T 280hp? A Stage 1 remap can take this 2017 - 2021 petrol engine from 280 BHP to 310 BHP and from 400 Nm to 460 Nm of torque (turbocharged). This engine scores 6/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alfa Romeo Stelvio can achieve.
How this engine compares
- 6thof 8 Alfa Romeo Stelvio engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Alfa Romeo Stelvio 2.0T 280hp is a 2.0L turbocharged petrol engine producing 280 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 310 BHP and 460 Nm — a gain of around 30 BHP (11%) and 60 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.