Alfa Romeo Brera 3.2 JTS V6 260hp Remap
Expected gains of +10 BHP and +18 Nm torque
Get Your Free Quote ↓BHP+10 hp (4%)
Standard
260 hp
Tuned
270 hp
Torque+18 Nm (6%)
Standard
322 Nm
Tuned
340 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowAlfa Romeo Brera 3.2 JTS V6 260hp ECU Remapping
Considering an ECU remap for your Alfa Romeo Brera 3.2 JTS V6 260hp? A Stage 1 remap can take this 2006 - 2008 petrol engine from 260 BHP to 270 BHP and from 322 Nm to 340 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alfa Romeo Brera can achieve.
How this engine compares
- 9thof 10 Alfa Romeo Brera engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 7%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Alfa Romeo Brera 3.2 JTS V6 260hp is a 3.2L naturally aspirated petrol engine producing 260 BHP and 322 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 270 BHP and 340 Nm — a gain of around 10 BHP (4%) and 18 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Brera 2006 - 2008 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|