BHP+10 hp (5%)
Standard
190 hp
Tuned
200 hp
Torque+20 Nm (9%)
Standard
220 Nm
Tuned
240 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowAlfa Romeo 156 2.5 V6 190hp ECU Remapping
Considering an ECU remap for your Alfa Romeo 156 2.5 V6 190hp? A Stage 1 remap can take this 1997 - 2003 petrol engine from 190 BHP to 200 BHP and from 220 Nm to 240 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alfa Romeo 156 can achieve.
How this engine compares
- 20thof 22 Alfa Romeo 156 engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Alfa Romeo 156 2.5 V6 190hp is a 2.5L naturally aspirated petrol engine producing 190 BHP and 220 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 240 Nm — a gain of around 10 BHP (5%) and 20 Nm (9%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 156 1997 - 2003 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|