Alfa Romeo 147 3.2 V6 GTA 250hp Remap
Expected gains of +25 BHP and +25 Nm torque
Get Your Free Quote ↓BHP+25 hp (10%)
Standard
250 hp
Tuned
275 hp
Torque+25 Nm (8%)
Standard
300 Nm
Tuned
325 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowAlfa Romeo 147 3.2 V6 GTA 250hp ECU Remapping
Considering an ECU remap for your Alfa Romeo 147 3.2 V6 GTA 250hp? A Stage 1 remap can take this 2005 -> petrol engine from 250 BHP to 275 BHP and from 300 Nm to 325 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alfa Romeo 147 can achieve.
How this engine compares
- 12thof 20 Alfa Romeo 147 engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Alfa Romeo 147 3.2 V6 GTA 250hp is a 3.2L naturally aspirated petrol engine producing 250 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 275 BHP and 325 Nm — a gain of around 25 BHP (10%) and 25 Nm (8%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 147 2005 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|