BHP+28 hp (10%)
Standard
272 hp
Tuned
300 hp
Torque+85 Nm (22%)
Standard
380 Nm
Tuned
465 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumAcura RDX 2.0T 272hp ECU Remapping
Considering an ECU remap for your Acura RDX 2.0T 272hp? A Stage 1 remap can take this 2019 - 2021 petrol engine from 272 BHP to 300 BHP and from 380 Nm to 465 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Acura RDX can achieve.
How this engine compares
- 37%of the 9,842 engines we hold gain data for see a smaller power increase
- 73%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Acura RDX 2.0T 272hp is a 2.0L turbocharged petrol engine producing 272 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 465 Nm — a gain of around 28 BHP (10%) and 85 Nm (22%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.
Technical Specifications
- Fuel Type
- Petrol
- Aspiration